Key takeaways
- NABH is a constituent board of the Quality Council of India (QCI).
- The 6th edition hospital standards have 10 chapters and 639 objective elements – 105 core, 457 commitment, 60 achievement and 17 excellence.
- Preparation is the longest phase: gap assessment, policies and SOPs, training, quality indicators and internal audits.
- Total cost = NABH fees + upgrades to infrastructure and safety + training time + consulting support.
- Accreditation is not a one-time event – surveillance and re-accreditation assessments follow.
What is NABH accreditation?
The National Accreditation Board for Hospitals & Healthcare Providers (NABH) is a constituent board of the Quality Council of India (QCI). It sets and assesses standards for hospitals and other healthcare providers. A hospital that meets NABH standards is accredited; smaller or newer organisations can begin with entry-level certification.
Accreditation tells patients, insurers and referring doctors that the hospital follows defined, independently assessed systems for patient care, safety, infection control, medication management, facility safety and governance.
Why hospitals pursue NABH
- Patient safety and clinical quality – standardised processes reduce variation and avoidable harm.
- Insurance and empanelment – many insurers, TPAs, corporate clients and government health schemes prefer, or offer better terms to, accredited hospitals.
- Reputation – accreditation is a credible, third-party signal of quality for patients and referring doctors.
- Better management – quality indicators, audits and clear responsibilities give leaders reliable data to run the hospital.
NABH 6th edition standards at a glance
NABH’s hospital accreditation standards, 6th edition, were published in January 2025. They are organised into 10 chapters:
| Code | Chapter | What it covers |
|---|---|---|
| AAC | Access, Assessment and Continuity of Care | Registration, admission, patient assessment, diagnostics, transfer and discharge |
| COP | Care of Patients | Uniform care, emergency, high-risk patients and procedures, anaesthesia and surgery |
| MOM | Management of Medication | Selection, storage, prescription, dispensing, administration and monitoring of medicines |
| PRE | Patient Rights and Education | Rights, consent, privacy, complaints and patient education |
| IPC | Infection Prevention and Control | Infection control programme, surveillance, hand hygiene, sterilisation and biomedical waste |
| PSQ | Patient Safety and Quality Improvement | Quality programme, indicators, incident reporting, clinical and managerial audits |
| ROM | Responsibilities of Management | Governance, leadership, ethics and organisational responsibilities |
| FMS | Facility Management and Safety | Building safety, fire, utilities, medical equipment, security and disaster preparedness |
| IMS | Information Management System | Medical records, data management, confidentiality and information security |
| HRM | Human Resource Management | Manpower planning, credentialing, training, staff health and performance |
The 6th edition contains 639 objective elements, grouped by the level at which they are assessed:
| Category | Objective elements | When assessed |
|---|---|---|
| Core | 105 | Mandatory at every assessment |
| Commitment | 457 | Final assessment |
| Achievement | 60 | Surveillance assessment |
| Excellence | 17 | Re-accreditation |
| Total | 639 |
Notable themes in the 6th edition include stronger, mandatory “shall” language, renaming of the infection chapter to Infection Prevention and Control, and new emphasis on promotive and preventive health, sustainability in healthcare, hospital security and cyber-security.
The NABH accreditation process, step by step
- Choose the right route. Decide between entry-level certification and full accreditation based on your size, maturity and goals (see our entry level vs full accreditation comparison).
- Gap assessment. Assess every department against the current standards and list gaps in infrastructure, documentation, staffing and practice.
- Form the quality team. Appoint a quality manager and committees (quality, infection control, pharmacy and therapeutics, safety, and others as required).
- Documentation. Prepare the policies, SOPs, manuals, forms and registers required by each chapter – customised to how your hospital actually works.
- Implementation and training. Train every staff group on the new processes; fix infrastructure and safety gaps such as fire safety, signage and biomedical waste handling.
- Measure. Start collecting and analysing quality indicators, incident reports, audits and patient feedback, and act on the results.
- Internal audits and mock assessment. Audit compliance department by department and run a mock assessment to close remaining gaps.
- Apply. Register and submit the application and self-assessment through the NABH portal, with the required documents and fees.
- NABH assessment. Assessors review documents and visit the hospital, interviewing staff and checking records and practice against the standards.
- Close non-conformities. Submit corrective actions with evidence for any non-conformities raised.
- Accreditation decision. The accreditation committee reviews the assessment and corrective actions.
- Sustain. Maintain compliance through surveillance assessments and prepare for re-accreditation at the end of the cycle.
Application steps, fees and timelines are set by NABH and revised from time to time. Always confirm current requirements on the official NABH website, nabh.co.
How long does NABH take?
For most hospitals, preparation takes six to twelve months. A typical plan looks like this:
| Phase | Typical duration |
|---|---|
| Gap assessment and action plan | 2–4 weeks |
| Documentation (policies, SOPs, forms) | 2–3 months |
| Implementation, infrastructure fixes and training | 2–4 months, overlapping |
| Quality indicator data collection | At least 3 months of data before assessment |
| Internal audits and mock assessment | 3–6 weeks |
The biggest variables are leadership commitment, the condition of the building and fire safety systems, and how quickly staff adopt new practices.
What does NABH accreditation cost?
There is no single figure – total cost depends on bed strength and how many gaps need closing. Plan for four components:
- NABH fees – application, assessment and annual fees published by NABH, which vary by bed strength, plus assessors’ travel and stay.
- Infrastructure and safety upgrades – fire detection and fighting, signage, storage, biomedical waste, equipment calibration and similar gaps.
- People time – a quality manager, committee time and training hours.
- Consulting support – optional, but usually shortens preparation and reduces the risk of major non-conformities.
Common non-conformities we see
- Incomplete medical records – missing assessments, consent forms, or legible, timed and signed entries.
- High-risk and look-alike/sound-alike medicines not segregated or labelled.
- Hand-hygiene and infection-control practices not monitored with data.
- Fire drills, mock codes and disaster drills not conducted or documented.
- Doctors’ credentialing and privileging files incomplete.
- Equipment calibration and preventive maintenance records missing.
- Quality indicators collected but never analysed or acted upon (see our quality indicators guide).
- Staff unable to explain the policies they are expected to follow.
How Eynriex helps
Eynriex supports hospitals through the full NABH journey – gap assessment, documentation, training, quality indicators, internal audits, mock assessment and support during the final assessment. Read more about our NABH & JCI accreditation consulting.
Frequently asked questions
What is NABH accreditation?
NABH accreditation is a quality and patient-safety accreditation for hospitals in India granted by the National Accreditation Board for Hospitals & Healthcare Providers, a constituent board of the Quality Council of India. It confirms that a hospital meets a defined set of standards for patient care, safety and management.
How many chapters are there in the NABH 6th edition standards?
Ten: Access, Assessment and Continuity of Care (AAC); Care of Patients (COP); Management of Medication (MOM); Patient Rights and Education (PRE); Infection Prevention and Control (IPC); Patient Safety and Quality Improvement (PSQ); Responsibilities of Management (ROM); Facility Management and Safety (FMS); Information Management System (IMS); and Human Resource Management (HRM).
How long does NABH accreditation take?
Most hospitals need about six to twelve months of preparation before the assessment, depending on size, existing systems and how quickly gaps are closed. The application and assessment stages add further time.
Is NABH accreditation mandatory?
NABH accreditation is voluntary. However, many insurers, TPAs, corporate clients and government health schemes prefer or reward accredited hospitals, so it has become an important commercial as well as quality decision.